Modified Vertical Enclosure 39 × 42 × 56h cm with Front Glass Door (Samla 65 L base) – Lucy 3D Lab

• SKU: Tubs-0007.
• Dimensions: 39 × 42 × 56h cm.
• Base container: Samla 65 L.
• Configuration: vertical.
• Lid: included.
• Front door: Door-0100, 22 × 25 cm, with glass.
• Air vents: 4 AirV-0114, 50 mm, pre-installed.
• Lid clips: 4 Clip-0020.
• Material of 3D-printed accessories: PETG.
• Door assembly: provided separately to protect it during transport; screws, nuts, and instructions are included.
• Items not included: decor, substrate, lighting, heating, and internal accessories.
• Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals, subject to assessment of the box's suitability for the needs of the species and the individual specimen.
• Not suitable for: animals that are particularly strong or capable of deforming, lifting, or forcing the container and its components.
• Operating temperature: 0–45 °C.
• Cleaning: wash by hand with warm water and mild detergent. Dry completely before reuse.
• Modified finished product: Lucy 3D Lab is the manufacturer of the finished product Tubs-0007 and the included 3D-printed accessories.
• Third-party container: the Samla container is purchased and subsequently modified by Lucy 3D Lab. The brand is cited solely to identify the model used as a base; Lucy 3D Lab is not officially affiliated with or connected to the cited brand.
• Production: the modification of the container and the 3D printing of the accessories may result in minimal dimensional tolerances, slight surface variations, or small differences in cutting, drilling, positioning, and finishing compared to the images.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Tubs-0007.

• Not a toy. Product intended for an adult audience. Keep screws, nuts, clips, and other small components away from children.
• Door assembly: follow the instructions and use the included screws and nuts. Tighten without forcing and do not use the box until assembly is correctly completed.
• Checks: before use and periodically, check the door, glass, closures, clips, lid, screws, nuts, air vents, and container. Suspend use if cracks, deformations, sharp edges, or unstable components are present.
• Escape risk: ensure that the animal cannot open, move, deform, or pass through the door, lid, clips, air vents, or other existing spaces.
• Animal selection: before use, verify that the box's dimensions, ventilation, materials, closures, and environmental limits are adequate for the needs of the species and the individual specimen. Do not use with animals that are particularly strong or capable of forcing the product.
• Ventilation and environmental parameters: do not block the air vents and check that temperature, humidity, and ventilation are appropriate for the animal. The box does not independently regulate these parameters.
• Placement: place the box on a flat, stable surface suitable for its weight.
• Glass: avoid impacts, pressure, and abnormal stress. Do not use the box if the glass is cracked, chipped, unstable, or damaged.
• Loads and stacking: do not sit on, crush, overload, or stack the box in an unstable manner.
• Temperature and heating: use exclusively between 0 and 45 °C. Any heating systems must be controlled by a thermostat and must not come into direct contact with the container or the 3D-printed accessories.
• Cleaning: wash by hand with warm water and mild detergent. Do not use solvents, harsh products, or dishwashers. Dry completely before reuse.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Returns: in the event of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable regulations.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.