Modified Box 56 × 39 × 42h cm with Front Plastic Mesh Door and Side Air Vents (65 L Samla base) – Lucy 3D Lab
Modified Box 56 × 39 × 42h cm with Front Plastic Mesh Door and Side Air Vents (65 L Samla base) – Lucy 3D Lab
This 65 L bin is designed for those looking for more space to dedicate to the enclosure setup, without sacrificing the convenience of front access. The door allows you to reach the inside without removing the lid every time, facilitating animal monitoring, cleaning, and routine management operations.
The plastic mesh integrated into the door and the two side air vents promote air circulation in multiple areas of the container. It is suitable for reptiles, arachnids, insects, and other terrarium animals compatible with the dimensions, ventilation, materials, closures, and environmental limits stated.
Why choose the pre-modified bin
- More space for setup: the container's dimensions allow you to organize the interior with substrate, hides, and other elements suited to the animal's needs.
- More practical front access: the door allows you to work inside while leaving the lid in place.
- Distributed ventilation: the mesh on the door and the two side air vents promote air circulation from different points.
- Main modifications already performed: the container is supplied already cut and drilled, with the air vents installed. Upon receipt, you only need to assemble the door with the included screws and nuts.
Already have the bin? Buy just the accessories
- 1 door with plastic mesh 25 × 25 cm – SKU Door-0110;
- 2 air vents 50 mm – SKU AirV-0114.
Search the site for the indicated SKUs to purchase the components you need separately. Cutting, drilling, and installing the accessories on your own bin must be performed by the buyer.
Technical characteristics
- SKU: Tubs-0024.
- Dimensions: 56 × 39 × 42h cm.
- Base container: Samla 65 L.
- Lid: included.
- Front door: 1 Door-0110 25 × 25 cm with plastic mesh.
- Door assembly: the door is shipped separately; screws and nuts are included.
- Air vents: 2 AirV-0114 50 mm, already installed.
- Position of air vents: upper side.
- Lid clips: not included.
- Material of 3D printed accessories: PETG.
- Items not included: lid clips, decor, substrate, lighting, heating, and internal accessories.
- Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals, provided that the stated characteristics are adequate for the needs of the species and the individual specimen.
- Not suitable for: animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, or the air vents.
- Operating temperature: 0–45 °C.
- Cleaning: hand wash with warm water and neutral detergent. Dry completely before reuse.
- Modifications performed by Lucy 3D Lab: cutting and drilling of the container, with installation of the air vents. The door is supplied with screws and nuts for assembly.
- Container produced by third parties: the Samla container is purchased as a finished product and subsequently modified by Lucy 3D Lab.
- Manufacturing tolerances: the modification of the container and 3D printing may result in minimal dimensional tolerances and slight differences in cutting, drilling, positioning, or finish compared to the images.
Safety Information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Tubs-0024.
- Not a toy. Product intended for an adult audience. Keep screws, nuts, and other separable components away from children.
- Door assembly: correctly secure the door using the included screws and nuts. Before use, verify its stability, alignment, and proper closure.
- Checks: before use and periodically, check the container, door, plastic mesh, closures, screws, nuts, air vents, and lid. Suspend use if there are cracks, deformations, sharp parts, or damaged or loose components.
- Plastic mesh: do not use the product if the mesh has tears, deformations, holes, or sharp parts. Verify that the animal and any feeder insects cannot pass through it or damage it.
- Choosing the animal: verify that dimensions, ventilation, materials, closures, and environmental limits are adequate for the needs of the species and the individual specimen.
- Ventilation and environmental parameters: do not obstruct the plastic mesh or air vents. The bin does not independently regulate temperature, humidity, or air exchange: regularly check the parameters required by the species.
- Escape risk: the door and lid do not make the bin completely escape-proof. Always verify they are closed correctly before leaving the animal unattended.
- Do not use with animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, or the air vents.
- Positioning: place the bin on a flat, stable surface adequate for its dimensions and weight.
- Temperature and heating: use only between 0 and 45 °C. Any heating systems must be controlled via thermostat and must not come into direct contact with the container or installed accessories.
- Cleaning: hand wash with warm water and neutral detergent. Do not use solvents, aggressive detergents, or dishwashers. Dry completely before reuse.
Returns, withdrawal, and legal warranty
Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, direct return shipping costs are borne by the customer.
Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable legislation.
Consult the complete policy on returns, withdrawal, refunds, and legal warranty.