Modified Box 57 × 39 × 28h cm with Front Plastic Mesh Door, Air Vents (Samla 45 L base) – Lucy 3D Lab
Modified Box 57 × 39 × 28h cm with Front Plastic Mesh Door, Air Vents (Samla 45 L base) – Lucy 3D Lab
The dimensions of 57 × 39 × 28h cm allow for organizing the interior by primarily utilizing the base surface, with space to add substrate, hides, and other elements suited to the animal's needs.
The front door simplifies access for feeding, cleaning, and routine management operations, while the plastic mesh and the two air vents promote air exchange at multiple points. The box is suitable for reptiles, arachnids, insects, and other terrarium animals compatible with the stated dimensions, ventilation, materials, closures, and environmental limits.
Why choose a pre-modified box
- More surface area to organize: the container's proportions allow you to make the most of the space available at the base.
- More practical front access: the door allows you to reach inside without having to remove the lid every time.
- Multi-point ventilation: the plastic mesh on the door and the two air vents contribute to air exchange within the box.
- Key modifications already performed: the container is supplied already cut and drilled, with air vents installed. You only need to assemble the door using the included screws and nuts.
- Lid secured by clips: the four included clips help keep it properly positioned during use.
Already have the box? Buy the accessories only
- 1 door with plastic mesh, 25 × 22h cm – SKU Door-0108;
- 2 air vents, 50 mm – SKU AirV-0114;
- 4 lid clips – SKU Clip-0020.
Search the site for the indicated SKUs to purchase the components you need separately. Cutting, drilling, and installing the accessories on your own box must be done by the purchaser.
Technical specifications
- SKU: Tubs-0027.
- Dimensions: 57 × 39 × 28h cm.
- Base container: Samla 45 L.
- Lid: included.
- Front door: 1 Door-0108 (25 × 22h cm) with plastic mesh.
- Mesh opening size: 3 × 1.1 mm.
- Door assembly: the door is shipped separately; screws and nuts are included.
- Air vents: 2 AirV-0114 (50 mm), pre-installed.
- Lid clips: 4 Clip-0020.
- Material of 3D printed accessories: PETG.
- Items not included: décor, substrate, lighting, heating, and internal accessories.
- Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals, provided the stated characteristics are appropriate for the needs of the species and the individual specimen.
- Not suitable for: animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vents, or the clips.
- Operating temperature: 0–45 °C.
- Cleaning: hand wash with lukewarm water and mild detergent. Dry completely before reuse.
- Modifications performed by Lucy 3D Lab: cutting and drilling of the container, with installation of air vents. The door is supplied with screws and nuts for assembly.
- Container produced by third parties: the Samla container is purchased as a finished product and subsequently modified by Lucy 3D Lab.
- Manufacturing tolerances: modification of the container and 3D printing may result in minimal dimensional tolerances and slight differences in cutting, drilling, positioning, or finish compared to the images.
Safety information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Tubs-0027.
- Not a toy. Product intended for an adult audience. Keep screws, nuts, clips, and other separable components away from children.
- Door assembly: correctly secure the door using the included screws and nuts. Before use, verify its stability, alignment, and proper closure.
- Checks: before use and periodically, inspect the container, door, plastic mesh, closures, screws, nuts, air vents, clips, and lid. Discontinue use in the presence of cracks, deformations, sharp edges, or damaged or loose components.
- Plastic mesh: do not use the product if the mesh shows tears, deformations, holes, or sharp parts. Verify that the animal and any feeder insects cannot pass through or damage it.
- Choice of animal: verify that dimensions, ventilation, materials, closures, and environmental limits are appropriate for the needs of the species and the individual specimen.
- Ventilation and environmental parameters: do not obstruct the plastic mesh or the air vents. The box does not autonomously regulate temperature, humidity, or air exchange: regularly check the parameters required by the species.
- Risk of escape: the door closure and lid clips do not make the box absolutely escape-proof. Always verify their correct positioning before leaving the animal unattended.
- Do not use with animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vents, or the clips.
- Placement: place the box on a flat, stable surface suitable for its dimensions and weight.
- Temperature and heating: use exclusively between 0 and 45 °C. Any heating systems must be controlled via a thermostat and must not come into direct contact with the container or the installed accessories.
- Cleaning: hand wash with lukewarm water and mild detergent. Do not use solvents, aggressive detergents, or dishwashers. Dry completely before reuse.
Returns, withdrawal, and legal warranty
Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.
Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.
See the full policy on returns, withdrawal, refunds, and legal warranty.