Modified Vertical Box 28 × 28 × 39h cm with Front Door with Plastic Mesh, Air Vent and Clips (Samla 22 L base) – Lucy 3D Lab
Modified Vertical Box 28 × 28 × 39h cm with Front Door with Plastic Mesh, Air Vent and Clips (Samla 22 L base) – Lucy 3D Lab
With these modifications, the Samla 22 L allows you to make the most of vertical space and is designed for animals that primarily utilize height. The 39 cm of vertical clearance allows for organizing the interior with branches, perches, plants, and elevated hides, while the front door facilitates animal monitoring and maintenance of the setup.
It is suitable for arboreal and semi-arboreal reptiles, as well as arachnids, insects, and other terrarium animals that utilize vertical space, provided that the dimensions, ventilation, materials, closures, and stated environmental limits are appropriate for the species and the individual specimen.
Why choose a pre-modified box
- More usable vertical space: the vertical configuration allows for creating an environment structured on multiple levels, suitable for arboreal and semi-arboreal animals.
- More practical front access: the door allows you to reach inside for cleaning, feeding, and routine management tasks without removing the lid.
- Multi-point air exchange: the plastic mesh integrated into the door and the 50 mm air vent contribute to the box's ventilation.
- Major modifications already performed: the container is supplied already cut and drilled, with the air vent installed. You only need to assemble the door using the included screws and nuts.
- Lid secured by clips: the four included clips help keep it properly positioned during use.
Already have the box? Buy the accessories only
- 1 door with plastic mesh, 18.5 × 22h cm – SKU Door-0106;
- 1 50 mm air vent – SKU AirV-0114;
- 4 lid clips – SKU Clip-0019.
Search the site for the indicated SKUs to purchase the components you need separately. Cutting, drilling, and installing the accessories on your own box must be performed by the buyer.
Technical features
- SKU: Tubs-0025.
- Configuration: vertical.
- Dimensions: 28 × 28 × 39h cm.
- Base container: Samla 22 L.
- Lid: included.
- Front door: 1 Door-0106, 18.5 × 22h cm with plastic mesh.
- Door assembly: the door is shipped separately; screws and nuts are included.
- Air vent: 1 AirV-0114, 50 mm, already installed.
- Lid clips: 4 Clip-0019.
- Material of 3D-printed accessories: PETG.
- Items not included: branches, perches, hides, plants, substrate, lighting, heating, and other internal accessories.
- Intended use and suitable animals: vertical setups for arboreal and semi-arboreal reptiles, arachnids, insects, and other terrarium animals that use vertical space, provided the stated features are adequate for the needs of the species and the individual specimen.
- Not suitable for: animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vent, or the clips.
- Operating temperature: 0–45 °C.
- Cleaning: wash by hand with warm water and neutral detergent. Dry completely before reuse.
- Modifications performed by Lucy 3D Lab: cutting and drilling of the container, with installation of the air vent. The door is supplied with screws and nuts for assembly.
- Container produced by third parties: the Samla container is purchased as a finished product and subsequently modified by Lucy 3D Lab.
- Manufacturing tolerances: modification of the container and 3D printing may result in minimal dimensional tolerances and slight differences in cutting, drilling, positioning, or finishing compared to the images.
Safety information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Tubs-0025.
- Not a toy. Product intended for adult use. Keep screws, nuts, clips, and other separable components away from children.
- Door assembly: secure the door correctly using the included screws and nuts. Before use, verify its stability, alignment, and proper closure.
- Checks: before use and periodically, inspect the container, door, plastic mesh, closures, screws, nuts, air vent, clips, and lid. Stop using if there are cracks, deformations, sharp edges, or damaged or loose components.
- Plastic mesh: do not use the product if the mesh has tears, deformations, holes, or sharp edges. Verify that the animal and any feeder insects cannot pass through or damage it.
- Choice of animal: verify that the dimensions, vertical clearance, ventilation, materials, closures, and environmental limits are adequate for the needs of the species and the individual specimen.
- Ventilation and environmental parameters: do not obstruct the plastic mesh or the air vent. The box does not automatically regulate temperature, humidity, or air exchange: regularly check the parameters required by the species.
- Escape risk: the door closure and lid clips do not make the box absolutely escape-proof. Always verify their correct positioning before leaving the animal unattended.
- Do not use with animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vent, or the clips.
- Positioning: place the box in a vertical position on a flat, stable surface suitable for its dimensions and weight.
- Temperature and heating: use only between 0 and 45 °C. Any heating systems must be controlled via thermostat and must not come into direct contact with the container or the installed accessories.
- Cleaning: wash by hand with warm water and neutral detergent. Do not use solvents, harsh detergents, or dishwashers. Dry completely before reuse.
Returns, withdrawal, and legal warranty
Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.
Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.
Consult the complete policy on returns, withdrawal, refunds, and legal warranty.