Door with Plastic Mesh 25 × 25h for Custom Enclosures and Terrariums - Lucy 3D Lab

• Model: door with 25 × 25h cm plastic mesh.
• SKU: Door-0110.
• Product dimensions: 25 × 25h cm.
• Compatibility: boxes, plastic terrariums, glass terrariums, and custom enclosures that require a 25 × 25h cm aerated door, subject to verification of measurements, thickness, mounting surface, mounting position, and final configuration.
• Material: PETG.
• Mesh: integrated plastic mesh with a hole size of approximately 3 × 2 mm.
• Other materials and components: metal hinges, PETG latches, 5 galvanized steel screws, and 5 stainless steel cap nuts.
• Mounting holes: external frame with 5 holes for assembly using the included screws.
• Included accessories: openable front door with a one-piece PETG printed inner frame and integrated plastic mesh, metal hinges, external frame, 5 galvanized steel screws, PETG latches, and 5 stainless steel cap nuts.
• Recommended target: reptiles of species, size, weight, strength, and behavior appropriate to the door dimensions, mesh size, and locking system. Not intended for large reptiles or those with high physical strength.
• Usage limits: the product is not intended to support loads, the animal's weight, or direct pressure on the mesh, hinges, or frame.
• Operating temperature: 0–45 °C.
• Intended use: accessory for modifying boxes, terrariums, and custom enclosures, to be used after verifying suitability regarding the project, animal, fastening system, mesh size, level of aeration, and required environmental parameters.
• Production: product made by Lucy 3D Lab via 3D printing and manual assembly. Minimal dimensional tolerances, slight surface variations, small layering marks, or slight differences in assembly may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Door-0110.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years old: there is a choking hazard due to the presence of small parts, screws, nuts, separable components, or fragments in case of impact, wear, detachment, or breakage.
• Animal target verification: use exclusively with animals appropriate for size, weight, strength, and behavior. Before use, verify that the door, the ~3 × 2 mm mesh, the latches, and the fastening system are suitable for the animal and the chosen configuration.
• Risk of escape or entrapment: verify that the mesh, gaps, frame, and closure do not allow the animal to pass through, get stuck, or escape, especially with very small or particularly thin specimens.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heat mats without a thermostat, spot lamps, incandescent lamps, ceramic lamps in direct contact, or heat sources above 45 °C.
• Mechanical risk: do not use the door as a load-bearing element, support point, or component subject to load. Do not force the opening, closing, hinges, mesh, or fastening systems.
• Installation and stability: before use, verify that the mounting hole is correct, the frame is stable, the 5 screws and 5 cap nuts are tightened correctly, and the door does not have any play, bending, detachments, sharp parts, or dangerous edges.
• Closing and anti-escape: the door can contribute to closing the box, but it does not guarantee by itself that the animal cannot escape. Always check the entire locking system, any gaps, container deformations, play between door and frame, and the animal's strength.
• Aeration and environmental parameters: excessive or insufficient ventilation can alter the humidity, temperature, and stability of the internal microclimate. Check the container's parameters after installation.
• Compatibility with the container: before use, verify that the door does not interfere with aeration, lids, walls, heating systems, internal furnishings, or other accessories present in the box.
• Maintenance: hand wash only with lukewarm water and mild soap. Do not put in the dishwasher. Dry completely before reuse. Avoid aggressive products that may damage the frame, latches, metal, or plastic mesh.
• Periodic check: regularly check for cracks, deformations, sharp parts, breakage, damaged mesh, loose hinges, loose screws, untightened nuts, or other damaged components. In case of damage, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of returning the goods are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

See the full policy on returns, withdrawal, refunds, and legal warranty.