Door with Plastic Mesh 12.5 × 12.5h cm for Custom Enclosures and Terrariums – Lucy 3D Lab

• Model: door with 12.5 × 12.5h cm plastic mesh.
• SKU: Door-0104 black; Door-0104-WHT white.
• Product dimensions: 12.5 × 12.5h cm.
• Compatibility: boxes, plastic terrariums, glass terrariums, and custom containers requiring a 12.5 × 12.5h cm aerated door, subject to verification of measurements, thickness, fixing surface, mounting position, and final configuration.
• Material: PETG.
• Mesh: integrated plastic mesh with approximately 2 × 2 mm opening.
• Other materials and components: metal hinges, PETG latches, 5 galvanized steel screws, and 5 stainless steel acorn nuts.
• Available colors: black and white, selectable from the product color variant.
• Special colors on request: any colors other than black and white can be evaluated before purchase, based on material availability, technical feasibility, and dedicated production times.
• Color warning: due to lighting and the settings of the device used to view the images, product colors may appear slightly different from the actual ones.
• Fixing holes: outer frame with 5 holes for mounting using the included screws.
• Included accessories: openable front door with PETG printed inner frame and integrated plastic mesh, metal hinges, outer frame, 5 galvanized steel screws, PETG latches, and 5 stainless steel acorn nuts.
• Recommended target: reptiles of species, size, weight, strength, and behavior appropriate to the door dimensions, mesh size, and locking system. Not recommended for large reptiles, those with high physical strength, or those small and slender enough to pass through the mesh or any gaps.
• Usage limits: the product is not intended to support loads, the weight of the animal, or direct pressure on the mesh, hinges, or frame.
• Operating temperature: 0–45 °C.
• Intended use: accessory for modifying custom boxes, terrariums, and containers, to be used after verifying suitability regarding the project, the animal, the fixing system, mesh size, ventilation level, and required environmental parameters.
• Production: product made by Lucy 3D Lab via 3D printing and manual assembly. Minimal dimensional tolerances, slight surface variations, small layering marks, or minor assembly differences may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Door-0104 black; Door-0104-WHT white.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years old: there is a choking hazard due to the presence of small parts, screws, nuts, separable components, or fragments in case of impact, wear, detachment, or breakage.
• Animal target verification: use exclusively with animals appropriate in size, weight, strength, and behavior. Before use, verify that the door, the approximately 2 × 2 mm mesh, the latches, and the fixing system are suitable for the animal and the chosen configuration.
• Risk of escape or entrapment: verify that the mesh, gaps, frame, and latch do not allow for the passage, entrapment, or escape of the animal, especially with very small or particularly slender specimens.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heating mats without a thermostat, spot lamps, incandescent lamps, ceramic lamps in direct contact, or heat sources exceeding 45 °C.
• Mechanical risk: do not use the door as a load-bearing element, support point, or component subject to load. Do not force the opening, closing, hinges, mesh, or fixing systems.
• Installation and stability: before use, verify that the mounting hole is correct, the frame is stable, the 5 screws and 5 acorn nuts are properly tightened, and the door does not have play, flexing, detachments, sharp parts, or dangerous edges.
• Closing and anti-escape: the door can contribute to closing the box but does not by itself guarantee that the animal cannot escape. Always check the entire locking system, any gaps, container deformations, play between the door and frame, and the animal's strength.
• Ventilation and environmental parameters: excessive or insufficient ventilation can alter humidity, temperature, and the stability of the internal microclimate. Check the container's parameters after installation.
• Container compatibility: before use, verify that the door does not interfere with ventilation, the lid, walls, heating systems, interior decor, or other accessories present in the box.
• Maintenance: hand wash only with lukewarm water and mild soap. Do not put in the dishwasher. Dry completely before reuse. Avoid aggressive products that could damage the frame, latches, metal, or plastic mesh.
• Periodic check: regularly check for the absence of cracks, deformations, sharp parts, breakage, damaged mesh, loose hinges, loose screws, untightened nuts, or other damaged components. In case of damage, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, direct return costs are borne by the customer.

Legal guarantee: products are covered by the Legal Guarantee of Conformity provided for by applicable law.

Consult the complete policy on returns, withdrawal, refunds, and legal guarantee.