Glass Door 25x25h for Custom Boxes and Terrariums - Lucy 3D Lab

• Model: door with 25 × 25h cm glass.
• SKU: Door-0101.
• Product dimensions: 25 × 25h cm.
• Compatibility: boxes, plastic terrariums, glass terrariums, and custom containers that require a 25 × 25h cm door, subject to verification of measurements, thicknesses, mounting surface, mounting position, and final configuration.
• Material: PETG.
• Other materials and components: 2 mm glass, metal hinges, PETG latches, 5 galvanized steel screws, and 5 stainless steel cap nuts.
• Glass: 2 mm glass bonded to the door panel with high-strength polymer. In case of breakage, replacement requires proper removal, cleaning, and re-installation by the purchaser.
• Mounting holes: external frame with 5 holes for mounting using the included screws.
• Accessories included: door with 2 mm glass, metal hinges, external frame, 5 galvanized steel screws, PETG latches, and 5 stainless steel cap nuts.
• Recommended target: reptiles of species, size, weight, strength, and behavior appropriate for the dimensions of the door, the 2 mm glass, and the locking system. Not recommended for reptiles that are large, very heavy, or possess significant physical strength.
• Usage limits: the product is not intended to support loads, the weight of the animal, or direct pressure on the glass, hinges, or frame.
• Operating temperature: 0–45 °C.
• Intended use: accessory for modifying boxes, terrariums, and custom containers, to be used after verifying suitability regarding the project, animal, fastening system, 2 mm glass, and required environmental parameters.
• Production: product made by Lucy 3D Lab via 3D printing and manual assembly. Minimal dimensional tolerances, slight surface variations, small layering marks, or minor assembly differences may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Door-0101.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years: there is a risk of choking due to the presence of small parts, screws, nuts, detachable components, or fragments in case of impact, wear, detachment, or breakage.
• Animal target verification: use exclusively with animals appropriate in size, weight, strength, and behavior. Before use, verify that the door, the 2 mm glass, the latches, and the mounting system are suitable for the animal and the chosen configuration.
• Glass risk: the 2 mm glass can break in case of impact, pressure, twisting, dropping, incorrect assembly, or use with unsuitable animals. In case of cracks, chips, detachment, or breakage, stop using it immediately and remove any fragments safely.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heating mats without a thermostat, spot lamps, incandescent bulbs, ceramic heaters in direct contact, or heat sources above 45 °C.
• Mechanical risk: do not use the door as a load-bearing element, support point, or component subject to load. Do not force the opening, closing, hinges, or mounting systems.
• Installation and stability: before use, verify that the mounting hole is correct, the frame is stable, the 5 screws and 5 cap nuts are correctly tightened, and the door has no play, flex, detachment, sharp parts, or dangerous edges.
• Locking and anti-escape: the door can contribute to securing the box, but it does not by itself guarantee that the animal cannot escape. Always check the entire locking system, any gaps, deformations of the container, play between the door and frame, and the strength of the animal.
• Compatibility with the container: before use, verify that the door does not interfere with ventilation, the lid, walls, heating systems, internal decor, or other accessories present in the box.
• Maintenance: wash by hand only with lukewarm water and neutral soap. Do not put in the dishwasher. Dry completely before reuse. Avoid aggressive products that could damage the frame, latches, bonding, metal, or glass.
• Periodic inspection: check regularly for the absence of cracks, deformations, sharp parts, breakage, chipped glass, loose hinges, loose screws, untightened nuts, or damaged components. In case of damage, stop using the product.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of returning the item are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

Consult the full policy on returns, withdrawal, refunds, and legal warranty.