Air Intake with External Cover 30 mm Hole Fine Mesh 1x9 mm - Lucy 3D Lab

• Model: air vent with fine mesh and external cover.
• SKU: AirV-0113.
• Mounting hole: approx. 30 mm.
• Mesh size: approx. 1 × 9 mm.
• Structure: two parts, an inner and an outer one, with a sandwich closure of the wall via gluing.
• Material: PETG.
• Fastening method: gluing using hot glue, silicone, or other suitable adhesive. Adhesives are not included unless otherwise indicated.
• Installation requirements: before assembly, verify the hole diameter, wall thickness, material and surface, chosen position, and adhesive used.
• Ventilation: air exchange depends on the number and position of the vents installed, the volume of the container, and the environmental parameters required by the species.
• Operating temperature: 0–45 °C.
• Intended use: accessory for the modification and aeration of boxes, terrariums, and other containers intended for terrarium use.
• Production: product made by Lucy 3D Lab via 3D printing. Minimal dimensional tolerances, slight surface variations, or small layer marks may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: AirV-0113.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: there is a risk of choking due to the presence of small parts, separable components, or fragments in case of detachment or breakage.
• Installation and fastening: install on an approximately 30 mm hole and on a wall suitable for sandwich closure. Use an adhesive suitable for PETG, the container material, and the expected temperature and humidity conditions.
• Adhesive stabilization: wait for the adhesive to fully dry, stabilize, and, when necessary, cool down before introducing animals. Do not use the air vent if it feels loose or is not securely fastened.
• Animals and risk of escape: verify that the animal's species, size, strength, and behavior are appropriate for the approx. 1 × 0.9 mm mesh. Ensure that the animal cannot pass through it, get stuck, damage the product, or ingest any fragments.
• Aeration and environmental parameters: the air vent contributes to air exchange but does not automatically guarantee adequate temperature, humidity, ventilation, or air quality values. Check the parameters after installation.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heat sources above 45 °C, or heating systems without a thermostat.
• Placement: ensure that substrate, furnishings, plants, rocks, branches, supports, or other accessories do not obstruct airflow.
• Maintenance: hand wash with warm water and mild soap. Do not use harsh products, do not put in the dishwasher, and dry completely before reuse.
• Periodic check: regularly verify the integrity, fastening, adhesive, and cleanliness of the mesh. In the presence of cracks, deformations, sharp parts, obstructions, or even partial detachment, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.