Air Intake with External Cover for 63 mm Hole to be Glued - Lucy 3D Lab

• Model: air vent with outer cover for bonding.
• SKU: AirV-0116.
• Mounting hole: approximately 63 mm.
• Structure: two parts, an inner and an outer, applied in a sandwich configuration on the container wall.
• Material: PETG.
• Fastening method: bonding using hot glue, silicone, or another suitable adhesive. Adhesives are not included.
• Installation requirements: before assembly, verify the hole diameter, wall thickness, material and surface, chosen position, and suitability of the adhesive.
• Ventilation: air exchange depends on the number and position of the installed vents, the volume of the container, and the environmental parameters required by the species.
• Operating temperature: 0–45 °C.
• Intended use: accessory for the modification and aeration of terrariums, boxes, and containers intended for terrarium use.
• Production: product made by Lucy 3D Lab via 3D printing. Minimal dimensional tolerances, slight surface variations, or small layering marks may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: AirV-0116.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: there is a risk of choking due to the presence of small parts, separable components, or fragments in case of detachment or breakage.
• Installation and fastening: install on an approximately 63 mm hole and on a wall suitable for sandwich mounting. Use an adhesive compatible with PETG, the container material, and the intended environmental conditions.
• Adhesive stabilization: wait for the adhesive to dry completely, stabilize, and, when necessary, cool down before introducing animals. Do not use the air vent if it is loose or unstably fixed.
• Animals and risk of escape: verify that the species, size, strength, and behavior of the animal are compatible with the actual openings. Ensure that the animal or feeder insects cannot pass through them, become trapped, damage the product, or ingest any fragments.
• Aeration and environmental parameters: the air vent contributes to air exchange but does not automatically guarantee adequate temperature, humidity, ventilation, and air quality values. Check parameters after installation.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heat sources above 45 °C, or heating systems without a thermostat.
• Maintenance: hand wash with lukewarm water and mild detergent. Do not use solvents or aggressive detergents, do not place in the dishwasher, and dry completely before reuse.
• Periodic inspection: regularly check the integrity, fastening, adhesive, and cleanliness. In the presence of cracks, deformations, sharp parts, obstructions, instability, or even partial detachment, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Returns: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: the products are covered by the Legal Warranty of Conformity provided for by applicable law.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.