10x6 cm Rectangular Air Vent, fine mesh, for gluing - Lucy 3D Lab

• Model: rectangular air vent with mesh for gluing.
• SKU: AirV-0117 black; AirV-0117-WHT white.
• Approximate dimensions: 10 × 6 cm.
• Mesh size: approximately 1.5 × 1 mm.
• Shape: rectangular.
• Material: PETG.
• Fixing method: gluing using hot glue, silicone, or another suitable adhesive. Adhesives are not included, unless otherwise indicated.
• Installation requirements: before mounting, check the dimensions of the air vent, the material and surface of the container, the chosen position, any opening created, and the compatibility of the adhesive.
• Available colors: black and white, selectable via the product color variant.
• Note: due to lighting and the settings of the device used to view the images, the product colors may appear slightly different from the actual ones.
• Special colors on request: colors other than black and white can be evaluated before purchase, based on material availability, technical feasibility, and production times.
• Ventilation: air exchange depends on the number and position of the installed vents, the volume of the container, the internal setup, and the environmental parameters required by the species.
• Operating temperature: 0–45 °C.
• Content: one rectangular air vent. Container, adhesives, and other accessories are not included.
• Intended use: accessory for the modification and aeration of terrariums, boxes, and containers intended for terrarium hobbyists.
• Production: product made by Lucy 3D Lab via 3D printing. Minimal dimensional tolerances, slight surface variations, small layering marks, or minor differences in finish may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: AirV-0117 black; AirV-0117-WHT white.

• This is not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: there is a risk of choking due to the presence of small parts, separable components, or fragments in case of detachment or breakage.
• Installation and fixing: verify that the approximately 10 × 6 cm air vent is compatible with the surface and any opening created. Use an adhesive suitable for PETG, the container material, and the expected environmental conditions.
• Adhesive stabilization: wait for the adhesive to dry and stabilize completely and, where necessary, cool down before introducing animals. Do not use the air vent if it is loose or unstably fixed.
• Animals and escape risk: verify that the species, size, strength, and behavior of the animal are compatible with the approx. 2 × 2 mm mesh. Ensure that animals or feeder insects cannot pass through it, become stuck, damage the product, or ingest any fragments.
• Aeration and environmental parameters: the air vent contributes to air exchange but does not automatically guarantee adequate temperature, humidity, ventilation, and air quality values. Check parameters after installation.
• Thermal risk: use only between 0 and 45 °C. Do not expose to open flames, heat sources above 45 °C, or heating systems without a thermostat. Verify that the product and adhesive do not deform or lose stability.
• Positioning: ensure that substrate, decorations, plants, rocks, branches, supports, or other accessories do not obstruct the passage of air.
• Maintenance: clean by hand with warm water and neutral soap. Do not use solvents or aggressive detergents, do not place in the dishwasher, and dry completely before reuse.
• Periodic check: regularly check the integrity, fixing, adhesive, and cleanliness of the mesh. In the presence of cracks, deformations, sharp parts, obstructions, instability, or even partial detachment, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Guarantee of Conformity provided by applicable legislation.

Consult the complete information on returns, withdrawal, refunds, and legal warranty.