Rectangular Air Vent 24 x 8h cm Mesh 2x2 mm for Gluing or Screwing - Lucy 3D Lab

• Model: Rectangular air vent for gluing or screwing.
• SKU: AirV-0122.
• Approximate dimensions: 24 × 8h cm.
• Mesh size: approximately 2 × 2 mm.
• Shape: Rectangular.
• Mounting holes: 2 screw holes.
• Mounting method: installation via compatible screws or bonding with hot glue, silicone, or other suitable adhesive.
• Screws and adhesive: not included.
• Material: PETG.
• Installation requirements: before mounting, verify dimensions, available surface, material and thickness of the container, any created opening, chosen position, and compatibility of screws or adhesive.
• Aeration: air exchange depends on the number and position of installed vents, the container volume, temperature, humidity, internal setup, and the hosted species.
• Operating temperature: 0–45 °C.
• Content: one rectangular air vent. Box, terrarium, container, screws, and adhesive are not included.
• Intended use: aeration accessory for terrariums, boxes, and modified containers intended for terrarium use.
• Production: product made by Lucy 3D Lab via 3D printing. Minimal dimensional tolerances, slight surface variations, or small layering marks may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: AirV-0122.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years old: there is a risk of choking or injury due to the presence of small parts, separable components, or fragments in case of detachment or breakage.
• Animal compatibility: verify that the animal's species, size, strength, and behavior are compatible with the approx. 2 × 2 mm mesh, the achieved aeration, and the chosen configuration.
• Risk of escape or entrapment: ensure that animals or feeder insects cannot pass through the mesh, become trapped, damage the product, or ingest any fragments.
• Installation: verify that the approx. 24 × 8h cm air vent is compatible with the surface and any opening created.
• Mounting: use screws compatible with the material and thickness of the container or an adhesive suitable for PETG, the surface, and the intended environmental conditions.
• Mounting safety: screws must not leave exposed points or sharp parts. If gluing, wait for the adhesive to completely dry, stabilize, and cool before introducing animals.
• Aeration and environmental parameters: excessive or insufficient air exchange can alter humidity, temperature, and air quality. Check container parameters after installation.
• Thermal risk: use only between 0 and 45 °C. Do not expose to open flames, heat sources above 45 °C, or heating systems without a thermostat.
• Placement: ensure that substrate, decor, plants, rocks, branches, or other accessories do not obstruct airflow or interfere with the mounting.
• Maintenance: hand wash with warm water and mild soap. Do not use solvents or aggressive detergents, do not put in the dishwasher, and dry completely before reuse.
• Periodic check: regularly verify integrity, mounting stability, and cleanliness of the mesh. In the presence of cracks, deformations, sharp parts, obstructions, loose screws, or detachment of the adhesive, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, direct return costs are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable legislation.

View the complete policy on returns, withdrawal, refunds, and legal warranty.