Maxi V-Support without Holes for Pipes or Branches 20–40 mm for Arboreal and Semi-arboreal Reptiles – Lucy 3D Lab

• Model: Maxi V-support without holes for PVC pipes or branches
• SKU: Vsha-0063 black; Vsha-0063-WHT white
• Type: glue-on V-support
• Mounting holes: none
• Fixation method: gluing onto a suitable surface; adhesive not included, unless otherwise indicated in the packaging or the purchased variant
• Indicative pipe or branch diameter: 20 to 40 mm
• Material: PETG
• Available colors: black and white, selectable from the product color variant
• Special colors upon request: colors other than black and white may be assessed prior to purchase based on material availability, technical feasibility, and production times
• Attention: due to lighting and the settings of the device used to view the images, product colors may appear slightly different from the actual ones.
• Target animals: arboreal or semi-arboreal reptiles of size, strength, and behavior appropriate for the product and the installed configuration
• Recommended animal weight: 0 to 250 g, subject to verification of the stability of the fixation and the structure used
• Unsuitable animals: animals of excessive size or strength or capable of detaching, biting, deforming, or forcing the support or the installed pipe or branch
• Operating temperature: 0–45 °C
• Intended use: resting point for PVC pipes or branches in terrariums, tubs, and other enclosures intended for animal husbandry
• Production: product made by Lucy 3D Lab via 3D printing. The production process may leave slight layering marks or small surface aesthetic variations that do not compromise functionality, safety, or compliance with declared specifications.
  

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Vsha-0063 black; Vsha-0063-WHT white

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years: the support or any fragments generated by breakage may pose a choking hazard.
• Choice of adhesive: use an adhesive suitable for the container material, PETG, expected environmental conditions, and the presence of animals. Follow the instructions and warnings of the relevant manufacturer.
• Drying: do not place animals in the container until the adhesive is completely dry, stable, and free of odors or potentially dangerous residues.
• Surface preparation: apply the support exclusively onto an intact, clean, dry surface suitable for gluing.
• Stability: before use, verify the strength of the fixation and the correct seating of the pipe or branch. Do not use the product if the structure moves, rotates, or tends to detach.
• Target animals: use only with baby arboreal or semi-arboreal reptiles of appropriate size, weight, strength, and behavior. Do not exceed the recommended weight of 250 g.
• Risk of falling or detachment: discontinue use immediately if the support, adhesive, or installed structure shows signs of failure or loss of stability.
• Mechanical risk: do not use with animals capable of breaking, moving, biting, deforming, or forcing the support. Do not use as a load-bearing element for animals exceeding the recommended weight.
• Entrapment risk: verify that the support, the pipe or branch, and surrounding elements do not create gaps or points where the animal could become trapped or injured.
• Placement in the setup: ensure that the structure does not interfere with closures, ventilation, substrate, lighting, heating, or other accessories.
• Thermal risk: do not expose to open flames, heating mats without a thermostat, spot lamps, incandescent lamps, ceramic emitters in direct contact, or temperatures above 45 °C.
• Cleaning: clean gently by hand with warm water and mild soap or with specific reptile-safe detergents, avoiding weakening the fixation. Do not wash in the dishwasher and dry completely before reuse.
• Periodic check: regularly inspect the support, the fixation, and the installed structure. Discontinue use in the presence of cracks, deformations, damaged edges, detachment, or instability.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of return are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

View the full policy on returns, withdrawal, refunds, and legal warranty.