V-Toy Support without Holes 3.8 × 2.3 cm for PVC Pipes and Small Branches – Lucy 3D Lab

• Model: V-support Toy without holes for PVC pipes or small branches
• SKU: Vsha-0060 black; Vsha-0060-WHT white
• External dimensions: approximately 3.8 × 2.3 cm
• Type: V-support to be glued
• Fixing holes: absent
• Fixing method: gluing onto a suitable surface; adhesive not included unless otherwise indicated in the packaging or the purchased variant
• Approximate diameter of the pipe or branch: from 0.8 to 1.2 cm, equal to approximately 8–12 mm
• Material: PETG
• Available colors: black and white, selectable from the product color variant
• Special colors on request: any colors other than black and white can be evaluated before purchase based on material availability, technical feasibility, and production times
• Attention: due to lighting and the settings of the device used to view the images, the product colors may appear slightly different from the real ones.
• Target animals: baby arboreal or semi-arboreal reptiles of size, strength, and behavior suitable for the product and the installed configuration
• Approximate weight of the animal: up to approximately 100 g, subject to verification of the stability of the fixation and the structure used
• Not recommended animals: animals of excessive size or strength, or capable of detaching, biting, deforming, or forcing the support or the installed pipe or branch
• Operating temperature: 0–45 °C
• Intended use: support point for PVC pipes or small branches in terrariums, boxes, and other enclosures intended for breeding
• Production: product made by Lucy 3D Lab via 3D printing. The production process may leave slight layering marks or small superficial aesthetic variations that do not compromise functionality, safety, or compliance with declared characteristics.
  

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Vsha-0060 black; Vsha-0060-WHT white

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years old: the support or any fragments generated by breakage can pose a choking hazard.
• Choice of adhesive: use an adhesive suitable for the container material, for PETG, for the expected environmental conditions, and for the presence of animals. Follow the instructions and warnings of the relative manufacturer.
• Drying: do not place animals in the container until the adhesive is completely dry, stable, and free of odors or potentially dangerous residues.
• Surface preparation: apply the support exclusively to an intact, clean, dry surface suitable for gluing.
• Stability: before use, check the tightness of the fixation and the correct support of the pipe or branch. Do not use the product if the structure moves, rotates, or tends to detach.
• Target animals: use exclusively with baby arboreal or semi-arboreal reptiles of appropriate size, weight, strength, and behavior. Do not exceed the indicative limit of 100 g.
• Risk of falling or detachment: stop use immediately if the support, the adhesive, or the installed structure shows signs of failure or loss of stability.
• Risk of entrapment: verify that the support, the pipe or branch, and surrounding elements do not create gaps or points where the animal could become trapped or injured.
• Placement in the setup: ensure that the structure does not interfere with closures, ventilation, substrate, lighting, heating, or other accessories.
• Thermal risk: do not expose to open flames, heating mats without a thermostat, spot lamps, incandescent bulbs, ceramic emitters in direct contact, or temperatures above 45 °C.
• Cleaning: clean gently by hand with warm water and neutral soap or with specific cleaners for reptiles, avoiding weakening the fixation. Do not wash in the dishwasher and dry completely before reuse.
• Periodic check: check the support, the fixation, and the installed structure regularly. Stop use in the presence of cracks, deformations, damaged edges, detachment, or instability.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For products made to measure or clearly customized, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, direct return costs are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

Consult the complete information on returns, withdrawal, refunds, and legal warranty.