Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab

Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab

€3,00 EUR
Skip to product information
Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab
  • Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab
  • Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab
Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab

Set of 10 Disposable Cups 5.5 × 5.2 cm for Water and Food – Lucy 3D Lab

€3,00 EUR
Shipping calculated at checkout.
The package includes 10 disposable food-grade plastic cups, measuring approximately 5.5 × 5.2 cm. They are designed as replacements for CupH-0081 and CupH-0082 holders and for other cup holders with a seat of the same dimensions.

They can hold small amounts of water, fruit mixes, food, or other preparations suitable for the housed species, facilitating the replacement and hygienic management of the feeding point.

They are suitable for reptiles up to approximately 100 g, whose size, strength, and behavior allow for safe use. Before use, verify that the cup is intact, correctly inserted into the holder, and sufficiently stable.

Why choose them

  • 10-piece pack: ensures you have multiple ready-to-use spares.
  • For water and food: can be used with small amounts of water, fruit mixes, and other preparations.
  • Dedicated replacements: suitable for CupH-0081 and CupH-0082 holders.
  • Practical replacement: simplifies the hygienic management of the feeding point.
Technical specifications
  • Model: disposable cup
  • SKU: CupH-0093
  • Quantity included: 10 cups
  • Dimensions: approximately 5.5 × 5.2 cm
  • Material: food-grade plastic
  • Dedicated holders: CupH-0081 and CupH-0082
  • Other compatible holders: cup holders with a seat of approximately 5.5 × 5.2 cm, upon verification of dimensions, proper fit, and stability
  • Intended use: holding small amounts of water, fruit mixes, food, or other preparations suitable for the housed species
  • Target animals: reptiles of size, strength, and behavior appropriate for the dimensions and stability of the cup
  • Approximate animal weight: up to approximately 100 g
  • Method of use: disposable accessory to be replaced after use or earlier if dirty, deformed, or damaged
  • Operating temperature: 0–40 °C
  • Intended purpose: replacement for cup holders used in terrariums, boxes, and other breeding enclosures
Safety information – Regulation (EU) 2023/988 (GPSR)

Distributor:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: CupH-0093

  • Not a toy. Product intended for an adult audience. Not suitable for children under 14 years: the cup or any fragments generated by deformation or breakage may pose a choking hazard.
  • Insertion and stability: use a cup holder of the correct dimensions. Do not force insertion and ensure that both the cup and holder cannot be easily tipped over by the animal.
  • Use with water or food: use only water, food, or preparations suitable for the housed species. Do not leave spoiled residue inside the enclosure.
  • Disposable product: do not wash or reuse the cup. Replace it after use and immediately if dirty, smelling, deformed, cracked, damaged, or otherwise defective.
  • Target animals: use only with reptiles of appropriate size, weight, strength, and behavior. Do not exceed the indicative limit of 100 g and do not use with animals capable of biting, deforming, breaking, ingesting, or tipping over the cup.
  • Ingestion risk: ensure the animal cannot extract or ingest the cup. Discontinue use immediately in case of instability or damage.
  • Placement in the enclosure: ensure that the cup and its holder do not interfere with closures, substrate, ventilation, heating, or other accessories.
  • Thermal risk: do not expose the cup to open flames, heat mats without a thermostat, spot lamps, incandescent bulbs, direct contact with ceramic emitters, or temperatures above 40 °C.
Returns, withdrawal, and legal warranty

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Returns: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable legislation.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.