Modified Enclosure 18.5 × 18.5 × 19h cm with Glass Door (Braplast base) – Lucy 3D Lab
Modified Enclosure 18.5 × 18.5 × 19h cm with Glass Door (Braplast base) – Lucy 3D Lab
This 18.5 × 18.5 × 19h cm Braplast box is a practical solution for the breeding and daily management of terrarium animals. It comes with a 13.5 × 13.5 cm front door with 2 mm glass, to be fastened with the included screws and nuts, and two pre-installed 50 mm side air vents.
It can be used for reptiles, arachnids, insects, and other terrarium animals, provided that the box's dimensions, ventilation, materials, closures, and environmental limits are appropriate for the needs of the species and the individual specimen.
Why choose the pre-modified box
- Front access: the opening door facilitates the management of the animal and the internal enclosure setup.
- Good visibility: the glass panel allows for easy observation of the inside of the box.
- Multi-point ventilation: the two side air vents promote air exchange.
- Practical to set up and clean: the container's structure facilitates internal organization and routine maintenance.
- Modifications already performed: the container is supplied already cut and drilled; all that remains is to fasten the door with the included screws and nuts.
Already have the box? Buy the accessories only
- 1 13.5 × 13.5 cm door with 2 mm glass – SKU Door-0096;
- 2 50 mm air vents – SKU AirV-0114;
- Container not included: search for the SKUs on the site to purchase the accessories separately. Cutting, drilling, and assembly on your own box must be performed by the buyer.
Technical specifications
- SKU: Tubs-0017
- Dimensions: 18.5 × 18.5 × 19h cm
- Base container: Braplast
- Door: 13.5 × 13.5 cm Door-0096 with glass
- Glass thickness: 2 mm
- Door assembly: supplied separately, with included screws and nuts
- Air vents: 2 pre-installed 50 mm AirV-0114
- Lid clips: not included
- 3D printed accessory material: PETG
- Usage temperature: 0–45 °C
- Cleaning: hand wash with warm water and mild detergent
- Items not included: decor, substrate, lighting, heating, and internal accessories
- Modification performed by Lucy 3D Lab: cutting and drilling of the container, installation of air vents, and preparation for door assembly.
- Container produced by third parties: the Braplast container is purchased as a finished product and subsequently modified by Lucy 3D Lab.
- Manufacturing tolerances: the modification of the container and 3D printing may result in minor dimensional tolerances and slight differences in cutting, drilling, positioning, or finish compared to the images.
Safety information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Tubs-0017
- Not a toy: keep screws, nuts, and other small parts away from children.
- Door assembly: properly fasten the door using the included screws and nuts, checking for stability, alignment, and correct closure.
- Checks: before use and periodically, check the container, lid, door, glass, closures, screws, nuts, and air vents. Do not use if there are cracks, deformations, sharp parts, or damaged or loose components.
- Glass: do not use the product if the glass shows cracks, chips, detachments, or breakage.
- Choice of animal: verify that the dimensions, ventilation, materials, closures, and environmental limits of the box are appropriate for the needs of the species and the individual specimen.
- Ventilation and environmental parameters: do not obstruct the air vents. The box does not independently regulate temperature, humidity, and air exchange: regularly check the parameters required by the species.
- Risk of escape: the box and installed components do not absolutely guarantee the absence of escapes. Always verify the correct closure of the door and lid.
- Do not use with animals capable of deforming, lifting, forcing, or damaging the container, lid, door, or closures.
- Placement: place the box on a stable and level surface, protected from impacts and falls.
- Temperature and heating: do not expose to flames, direct heat sources, or temperatures above 45 °C. Use any heating systems only with a thermostat and without direct contact with the container or installed accessories.
- Cleaning: hand wash with warm water and mild detergent, then dry completely. Do not use solvents or harsh detergents and do not wash in a dishwasher.
Returns, withdrawal, and legal guarantee
Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, the direct costs of returning the products are to be borne by the customer.
Legal guarantee: products are covered by the Legal Conformity Guarantee provided for by applicable law.
Consult the complete policy on returns, withdrawal, refunds, and legal guarantee.