Modified Box 56 × 39 × 28h cm with Front Glass Door – Lucy 3D Lab

• SKU: Tubs-0004.
• Approximate dimensions: 56 × 39 × 28h cm.
• Base container: commercial container purchased from third-party suppliers.
• Lid: included.
• Front door: Door-0099 measuring 25 × 22h cm, with 2 mm glass and 3 closures.
• Air vents: 4 AirV-0114 50 mm vents, pre-installed.
• Lid clips: 4 Clip-0020.
• Material of 3D-printed accessories: PETG.
• Door assembly: provided separately to protect it during transport; screws, nuts, and instructions are included.
• Items not included: decor, substrate, lighting, heating, and internal accessories.
• Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals compatible with the stated specifications.
• Not suitable for: large animals, or those that are particularly strong or capable of deforming or forcing the container and its components.
• Operating temperature: 0–45 °C.
• Cleaning: hand wash with warm water and mild detergent. Dry completely before reuse.
• Modified finished product: Lucy 3D Lab is the manufacturer of the finished Tubs-0004 product and the included 3D-printed accessories.
• Third-party container: the container is purchased and subsequently modified by Lucy 3D Lab. Any trademarks or commercial models are mentioned solely to identify the size or dimensional compatibility.
• Production: the modification of the container and the 3D printing of the accessories may result in minimal dimensional tolerances, slight surface variations, or small differences in cutting, drilling, positioning, and finish compared to the images.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product Identifier: Tubs-0004.

• Not a toy. Product intended for an adult audience. Keep screws, nuts, clips, and other small components away from children.
• Door assembly: follow the instructions and use the included screws and nuts. Tighten without forcing, and do not use the box before completing the assembly correctly.
• Inspections: before use and periodically, check the door, glass, closures, clips, lid, screws, nuts, air vents, and container. Suspend use if cracks, deformations, sharp edges, or unstable components are present.
• Escape risk: verify that the animal cannot open, move, deform, or pass through the door, lid, clips, air vents, or other existing spaces.
• Animal compatibility: use exclusively with animals compatible with the stated dimensions, ventilation, materials, closures, and environmental limits. Do not use with animals that are particularly large, strong, or capable of forcing the product.
• Ventilation and environmental parameters: do not block the air vents and ensure that temperature, humidity, and ventilation are appropriate for the animal. The box does not regulate these parameters independently.
• Positioning: place the box on a flat, stable surface suitable for its weight.
• Glass: avoid impacts, pressure, and abnormal stress. Do not use the box if the glass is cracked, chipped, unstable, or damaged.
• Loads and stacking: do not sit on, crush, overload, or stack the box in an unstable manner.
• Temperature and heating: use only between 0 and 45 °C. Any heating systems must be controlled via a thermostat and must not come into direct contact with the container or the printed accessories.
• Cleaning: hand wash with warm water and mild detergent. Do not use solvents, harsh products, or a dishwasher. Dry completely before reuse.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Returns: in the event of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Conformity Warranty as provided for by applicable law.

View the complete policy on returns, withdrawal, refunds, and legal warranty.