Modified Box 78 × 56 × 44h cm with Front Glass Door (Samla 130 L base) – Lucy 3D Lab

• SKU: Tubs-0008.
• Dimensions: 78 × 56 × 44h cm.
• Base container: Samla 130 L.
• Lid: included.
• Front door: Door-0102 measuring 35.5 × 27 cm, with glass.
• Air vents: 6 AirV-0112 measuring 50 mm, already installed.
• Lid clips: 4 Clip-0021.
• Material of 3D-printed accessories: PETG.
• Door assembly: provided separately to protect it during transport; screws, nuts, and instructions are included.
• Items not included: furnishings, substrate, lighting, heating, and internal accessories.
• Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals, subject to assessment of the box's suitability for the needs of the species and the individual specimen.
• Not suitable for: animals that are particularly strong or capable of deforming, lifting, or forcing the container and its components.
• Operating temperature: 0–45 °C.
• Cleaning: wash by hand with warm water and mild detergent. Dry completely before reuse.
• Modified finished product: Lucy 3D Lab is the manufacturer of the finished product Tubs-0008 and the included 3D-printed accessories.
• Third-party container: the Samla container is purchased and subsequently modified by Lucy 3D Lab. The brand is mentioned solely to identify the model used as a base; Lucy 3D Lab is not officially affiliated with or linked to the mentioned brand.
• Production: the modification of the container and the 3D printing of the accessories may result in minimal dimensional tolerances, slight surface variations, or small differences in cutting, drilling, positioning, and finishing compared to the images.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Tubs-0008.

• This is not a toy. Product intended for an adult audience. Keep screws, nuts, clips, and other small components away from children.
• Door assembly: follow the instructions and use the included screws and nuts. Tighten without forcing and do not use the box before completing the assembly correctly.
• Checks: before use and periodically, check the door, glass, closures, clips, lid, screws, nuts, air vents, and container. Suspend use if there are cracks, deformations, sharp edges, or unstable components.
• Escape risk: verify that the animal cannot open, move, deform, or pass through the door, lid, clips, air vents, or other existing gaps.
• Choice of animal: before use, verify that the dimensions, ventilation, materials, closures, and environmental limits of the box are adequate for the needs of the species and the individual specimen. Do not use with animals that are particularly strong or capable of forcing the product.
• Ventilation and environmental parameters: do not obstruct the air vents and check that temperature, humidity, and ventilation are appropriate for the animal. The box does not independently regulate these parameters.
• Placement: place the box on a flat, stable surface suitable for its weight.
• Glass: avoid impacts, pressure, and abnormal stress. Do not use the box if the glass is cracked, chipped, unstable, or damaged.
• Loads and stacking: do not sit on, crush, overload, or stack the box in an unstable manner.
• Temperature and heating: use only between 0 and 45 °C. Any heating systems must be controlled by a thermostat and must not come into direct contact with the container or the 3D-printed accessories.
• Cleaning: wash by hand with warm water and mild detergent. Do not use solvents, harsh products, or a dishwasher. Dry completely before reuse.

Withdrawal: for standard catalog products, the consumer can exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Returns: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal guarantee: products are covered by the Legal Conformity Guarantee provided for by applicable law.

See the full policy on returns, withdrawal, refunds, and legal guarantee.