Door with Plastic Mesh 15.5 × 22h cm for Custom Boxes and Terrariums – Lucy 3D Lab

• Model: door with plastic mesh 15.5 × 22h cm.
• SKU: Door-0106.
• Product dimensions: 15.5 × 22h cm.
• Compatibility: boxes, plastic terrariums, glass terrariums, and custom containers that require a 15.5 × 22h cm aerated door, subject to verification of measurements, thicknesses, mounting surface, mounting position, and final configuration.
• Material: PETG.
• Mesh: integrated plastic mesh with a grid of approximately 2 × 2 mm.
• Other materials and components: metal hinges, PETG latches, 5 galvanized steel screws, and 5 stainless steel cap nuts.
• Mounting holes: external frame with 5 holes for mounting via the included screws.
• Accessories included: openable front door with PETG printed inner frame and integrated plastic mesh, metal hinges, external frame, 5 galvanized steel screws, PETG latches, and 5 stainless steel cap nuts.
• Recommended target: reptiles of species, size, weight, strength, and behavior appropriate to the dimensions of the door, the mesh grid, and the locking system. Not suitable for large reptiles, those with high physical strength, or those small and slender enough to pass through the mesh or any gaps.
• Usage limits: the product is not intended to support loads, the animal's weight, or direct pressure on the mesh, hinges, or frame.
• Operating temperature: 0–45 °C.
• Intended use: accessory for modifying boxes, terrariums, and custom containers, to be used after verifying suitability regarding the project, the animal, the fastening system, the mesh size, the level of aeration, and the required environmental parameters.
• Production: product made by Lucy 3D Lab via 3D printing and manual assembly. Minor dimensional tolerances, slight surface variations, small layering marks, or slight assembly differences may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Door-0106.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years: there is a choking hazard due to the presence of small parts, screws, nuts, separable components, or fragments in case of impact, wear, detachment, or breakage.
• Animal target verification: use exclusively with animals appropriate for size, weight, strength, and behavior. Before use, verify that the door, the approximately 2 × 2 mm mesh, the latches, and the fastening system are suitable for the animal and the chosen configuration.
• Escape or entrapment risk: verify that the mesh, gaps, frame, and latch do not allow the animal to pass through, get stuck, or escape, especially with very small or particularly slender specimens.
• Thermal risk: use exclusively between 0 and 45 °C. Do not expose to open flames, heating mats without a thermostat, spot lamps, incandescent bulbs, ceramic lamps in direct contact, or heat sources exceeding 45 °C.
• Mechanical risk: do not use the door as a load-bearing element, support point, or component subject to stress. Do not force the opening, closing, hinges, mesh, or fastening systems.
• Installation and stability: before use, verify that the mounting hole is correct, the frame is stable, the 5 screws and 5 cap nuts are properly tightened, and the door has no play, flexing, detachments, sharp parts, or dangerous edges.
• Closing and anti-escape: the door can contribute to closing the box, but does not alone guarantee that the animal cannot escape. Always check the entire closing system, any gaps, deformations of the container, play between the door and frame, and the animal's strength.
• Aeration and environmental parameters: excessive or insufficient ventilation can alter humidity, temperature, and the stability of the internal microclimate. Check the container's parameters after installation.
• Compatibility with the container: before use, verify that the door does not interfere with aeration, the lid, walls, heating systems, internal decor, or other accessories present in the box.
• Maintenance: hand wash only with warm water and mild soap. Do not put in the dishwasher. Dry completely before reuse. Avoid aggressive products that may damage the frame, latches, metal, or plastic mesh.
• Periodic check: regularly check for cracks, deformations, sharp parts, breakage, damaged mesh, loose hinges, loose screws, untightened nuts, or other damaged components. In case of damage, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable legislation.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.