Screw-in Air Vent, 50 mm Hole, with 1 × 1.5 mm Extra-Fine Mesh and External Cover - Lucy 3D Lab

• Model: screw-in air vent with extra-fine mesh and external cover.
• SKU: AirV-0111 black; AirV-0111-WHT white.
• Mounting hole: approximately 50 mm.
• Mesh size: approximately 1 × 1.5 mm.
• Structure: two threaded elements with a sandwich closure on the container wall.
• External cover: included.
• Material: PETG.
• Recommended containers: terrariums, bins, and modified containers where it is possible to create an adequate hole and achieve stable tightening.
• Installation requirements: before mounting, check the diameter of the hole, the thickness and material of the wall, the chosen position, and the tightness of the thread.
• Available colors: black and white, selectable via the product color variant.
• Special colors upon request: colors other than black and white may be evaluated before purchase, based on material availability, technical feasibility, and production times.
• Recommended animals: reptiles, amphibians, arachnids, insects, crustaceans, and small invertebrates whose size, strength, and behavior are appropriate for the mesh and the chosen configuration.
• Ventilation: air exchange depends on the number and position of the installed vents, the volume of the container, temperature, humidity, internal setup, and the hosted species.
• Operating temperature: 0–45 °C.
• Intended use: technical accessory for terrariums, bins, and modified containers, usable in naturalistic, semi-naturalistic, sterile, temporary, or quarantine setups.
• Production: product made by Lucy 3D Lab using 3D printing. Minimal dimensional tolerances, slight surface variations, or small layering marks may result from the production process.

Note: due to lighting and the settings of the device used to view the images, the product colors may appear slightly different from the actual ones.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: AirV-0111 black; AirV-0111-WHT white.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: there is a risk of choking due to the presence of small parts, separable components, or fragments produced in the event of improper use, detachment, or breakage.
• Checking the hole and thickness: install only on an approximately 50 mm hole and on a wall that allows for proper threaded closure. An irregular hole or inadequate thickness may compromise the stability of the air vent.
• Tightening: screw in without forcing. Over-tightening can damage the thread or the container; insufficient tightening can cause instability or detachment.
• Extra-fine mesh: ensure that the hosted animals, feeder insects, or other small invertebrates cannot pass through the mesh, get stuck, or damage it.
• Verification of animal target: use only with animals appropriate in terms of species, size, strength, behavior, and environmental needs. Do not use with animals capable of biting, forcing, deforming, breaking, or ingesting parts of the product.
• Risk of escape or entrapment: the mesh reduces the risk of passage but does not guarantee absolute containment. Verify that the animal cannot pass through it or insert its head, limbs, claws, paws, or other body parts.
• Aeration and environmental parameters: the air vent contributes to air exchange but does not automatically guarantee adequate values for temperature, humidity, ventilation, and air quality. Check parameters after installation.
• Thermal risk: use only between 0 and 45 °C. Do not expose to open flames, close-range spot lamps, incandescent bulbs, direct-contact ceramic lamps, heating mats without a thermostat, or heat sources exceeding 45 °C.
• Use with heating systems: use any heating systems with a thermostat and correctly positioned probe, checking that the air vent and the container do not deform.
• Positioning in the enclosure: ensure that substrate, decor, plants, rocks, branches, supports, hides, or other accessories do not obstruct airflow.
• Maintenance: clean only by hand with lukewarm water and mild soap. Do not use aggressive products and do not put in the dishwasher. Dry completely before reuse.
• Periodic inspection: regularly check for integrity, fixation, threading, and cleanliness. In the presence of cracks, deformations, breakages, sharp parts, loss of stability, obstructions, or damaged threading, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, the direct costs of return are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable legislation.

Consult the complete policy on returns, withdrawal, refunds, and legal warranty.