Large Stylized Branch 20 × 13.5 cm for Arboreal Reptiles – Lucy 3D Lab

• Model: Large stylized branch with wall mount.
• SKU: Bran-0129.
• Approximate length: about 20 cm.
• Maximum footprint: about 20 × 13.5 cm.
• Branch thickness: about 1–1.4 cm.
• Material: PETG.
• Mounting method: wall installation using compatible screws.
• Screws: not included; must be chosen by the buyer based on the material, thickness, and structure of the mounting surface.
• Recommended reptile weight: approximately 0–100 g, subject to verification of mounting stability and compatibility with the animal.
• Suitable animals: baby arboreal or semi-arboreal snakes compatible with the dimensions, thickness, structure, and mounting system of the branch.
• Not suitable for: heavy, particularly strong, or aggressive animals, or those capable of forcing the support or not compatible with the branch thickness and available space.
• Intended use: raised internal support for environmental enrichment in terrariums, enclosures, and compatible containers.
• Setup type: naturalistic, semi-naturalistic, sterile, temporary, or quarantine, subject to verification of the housed species.
• Operating temperature: 0–45 °C.
• Content: one Large stylized branch. Screws, terrarium, enclosure, and external container are not included.
• Intended use: internal support for terrariums, enclosures, and containers intended for terrarium use.
• Production: product made by Lucy 3D Lab via 3D printing. Minimal dimensional tolerances, slight surface variations, small layer marks, or minor finish differences may result from the production process.

Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it

SKU / Product identifier: Bran-0129.

• Not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: there is a risk of choking or injury due to the presence of small parts, sharp edges, screws, or fragments in case of detachment or breakage.
• Wall mounting: install only on surfaces compatible in terms of material, thickness, stability, and position. Incorrect installation can cause the support to detach or fall.
• Screws not included: choose screws suitable for the container used. Ensure they are not too long, unstable, or pointing inwards and that they do not create dangerous points for the animal.
• Tightening: tighten screws without forcing. Overtightening can deform or break the support, while insufficient tightening can cause instability or detachment.
• Stability check: before use with live animals, manually test the stability of the branch and check that it does not move, has no excessive play, and does not flex abnormally.
• Animal compatibility: use only with baby arboreal or semi-arboreal snakes compatible in terms of size, strength, behavior, and method of using the support.
• Indicative load: observe the recommended weight reported in the technical specifications. Stability also depends on the mounting, the container, the animal's behavior, and the final configuration.
• Risk of falling: position the branch to reduce the risk of dangerous falls, collisions with other furnishings, or contact with heat sources.
• Risk of entrapment: check that the animal cannot become trapped between the branch, wall, screws, furnishings, or other setup elements.
• Risk of breakage or ingestion: do not use with animals capable of biting, breaking, deforming, or ingesting parts of the product.
• Thermal risk: use only between 0 and 45 °C. Do not expose to open flames, lamps or heating elements in direct contact, heating mats without a thermostat, or heat sources exceeding 45 °C.
• Use with heating systems: use any heating systems with a thermostat and properly positioned probe. Ensure the product does not deform and that the animal cannot come into contact with dangerous heat sources.
• Compatibility with the setup: check that substrate, hides, bowls, plants, rocks, other branches, or supports do not interfere with the mounting or the animal's movement.
• Maintenance: hand wash with lukewarm water and mild soap. Do not use aggressive products and do not place in the dishwasher. Dry completely before reuse.
• Periodic inspection: regularly check the integrity, mounting, screw tightness, and cleanliness. In the presence of cracks, deformations, breakage, sharp parts, loss of stability, or even partial detachment, discontinue use.

Withdrawal: for standard catalog products, the consumer may exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.

Return: in case of withdrawal, direct return costs are borne by the customer.

Legal warranty: products are covered by the Legal Warranty of Conformity provided for by applicable law.

See the full policy on returns, withdrawal, refunds, and legal warranty.