Layout X Support with 7 cm Side Bowl, 22 × 28 × 7h cm or 22 × 28 × 14h cm – Lucy 3D Lab
bottom 22 x 28 x 7h
€10,00 EUR
Skip to product information
Layout X Support with 7 cm Side Bowl, 22 × 28 × 7h cm or 22 × 28 × 14h cm – Lucy 3D Lab
€10,00 EUR
Shipping calculated at checkout.
The Layout X structure creates elevated support points and internal paths, helping to organize the space in compatible boxes, terrariums, and hobby containers. The support includes an integrated 7 cm side bowl.
Designed for baby or adult arboreal or semi-arboreal snakes weighing 0 to 200 g, it can be used in compatible configurations for communal hatching of baby arboreal species, quarantine, and temporary, sterile, naturalistic, or semi-naturalistic setups.
It is available in two heights: 7 cm and 14 cm. The included bowl is replaceable, and the corresponding spare part is available separately on the site.
Why choose it
- Layout X structure: creates raised points, paths, and support zones inside the container.
- Two heights available: allows you to choose between the 7 cm high and 14 cm high versions.
- Side bowl included: integrates a 7 cm bowl, replaceable if necessary.
- More practical management: facilitates the creation of organized and easily monitorable internal configurations.
Technical specifications
- Model: Layout X support with 7 cm side bowl
- SKU: Perc-0046 low version; Perc-0046-14H high version
- Product dimensions: low version 22 × 28 × 7h cm; high version 22 × 28 × 14h cm
- Compatibility: boxes, terrariums, and hobby containers with compatible internal dimensions
- Materials: PETG support; included bowl in Bio PLA
- Tubular element: approx. Ø 7–7.5 mm, with a flat top side
- Feet: interlocking or glue-on, depending on the chosen configuration
- Contents: 1 Layout X support, interlocking or glue-on feet, and 1 side bowl of 7 cm; external container not included
- Replacement bowl: SKU CupH-0096, available separately on the site
- Recommended use: setups for baby or adult arboreal or semi-arboreal snakes, including compatible configurations for communal hatching of baby arboreal species, quarantine, and temporary, sterile, naturalistic, or semi-naturalistic setups
- Recommended animal weight: 0 to 200 g
- Operating temperature: 0–45 °C
- Intended use: accessory for hobby terraristics and internal setups, to be used with compatible species, sizes, weights, behaviors, and environmental parameters
-
Production: product made by Lucy 3D Lab via 3D printing. The production process may leave slight layering marks or minor surface aesthetic variations that do not compromise functionality, safety, or compliance with the declared characteristics.
Safety information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Perc-0046 low version; Perc-0046-14H high version
- Not a toy. Product intended for an adult audience. Not suitable for children under 14 years of age: any small parts or fragments generated by impact, wear, detachment, or breakage may pose a choking hazard.
- Compatibility and load: use only with animals compatible in terms of species, size, weight, strength, and behavior. Do not exceed the 200 g limit and do not overload the structure.
- Installation and stability: verify that the support is stable, correctly positioned, and cannot tip over, flex, slide, or detach. Assemble and check the interlocking or glue-on feet correctly.
- Side bowl: verify that the bowl is correctly positioned, stable, and suitable for the intended use. Do not use if it is unstable, deformed, damaged, or easily tipped over by the animal.
- Thermal risk: do not expose to open flames, heat mats without a thermostat, spot lamps, incandescent bulbs, ceramic lamps in direct contact, or temperatures above 45 °C.
- Maintenance: wash by hand only with lukewarm water and mild soap. Do not put in the dishwasher and dry completely before reuse.
- Periodic check: discontinue use in the presence of instability, loose components, cracks, deformations, sharp parts, breakage, or other damage.
Returns, withdrawal, and legal warranty
Withdrawal: for standard catalog products, the consumer can exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.
Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable law.
See the full policy on returns, withdrawal, refunds, and legal warranty.