Modified Box 39 × 28 × 28h cm with Front Plastic Mesh Door, Air Vent and Clips (22 L Samla base) – Lucy 3D Lab
Modified Box 39 × 28 × 28h cm with Front Plastic Mesh Door, Air Vent and Clips (22 L Samla base) – Lucy 3D Lab
Designed with a practical front access, this box simplifies every inspection and maintenance task for the interior spaces. The door with plastic mesh and the air vent on the lid promote air exchange from two different areas of the container.
The box is supplied pre-cut, with the air vent installed and with everything necessary to mount the door. It is suitable for reptiles, arachnids, insects, and other terrarium animals compatible with the stated dimensions, ventilation, materials, closures, and environmental limits.
Why choose a pre-modified box
- More practical front access: the door allows you to work inside without having to remove the lid every time.
- Front and top ventilation: the plastic mesh integrated into the door and the air vent on the lid promote air exchange in multiple points.
- Work already performed: the container is already cut and the air vent is already installed; the door only needs to be fixed with the included screws and nuts.
- Dedicated closures: the three side tabs hold the door in place, while the clips help keep the lid correctly positioned.
Already have the box? Buy just the accessories
- 1 door with 18.5 × 18.5 cm plastic mesh – SKU Door-0107;
- 1 50 mm air vent – SKU AirV-0114;
- Lid clips – SKU Clip-0019, in the quantity required for the desired configuration.
Search the site for the indicated SKUs to purchase the components you need separately. Cutting the container, drilling the lid, and assembling the accessories on your own box must be performed by the buyer.
Technical specifications
- SKU: Tubs-0023.
- Dimensions: 39 × 28 × 28h cm.
- Base container: Samla 22 L.
- Lid: included.
- Front door: 1 Door-0107, 18.5 × 18.5 cm with plastic mesh.
- Door closure: 3 side tabs.
- Door assembly: the door is shipped separately; screws and nuts are included.
- Air vent: 1 AirV-0114, 50 mm, already installed on the lid.
- Lid clips: Clip-0019, in the quantity provided by the purchased configuration.
- Material of 3D printed accessories: PETG.
- Items not included: decor, substrate, lighting, heating, and internal accessories.
- Intended use and suitable animals: setups for reptiles, arachnids, insects, and other terrarium animals, provided that the stated characteristics are appropriate for the needs of the species and the individual specimen.
- Not suitable for: animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vent, or the closures.
- Operating temperature: 0–45 °C.
- Cleaning: wash by hand with warm water and a neutral detergent. Dry completely before reuse.
- Modification performed by Lucy 3D Lab: cutting the container and installing the air vent on the lid. The door is supplied with screws and nuts for assembly.
- Container produced by third parties: the Samla container is purchased as a finished product and subsequently modified by Lucy 3D Lab.
- Manufacturing tolerances: container modification and 3D printing may result in minimal dimensional tolerances and slight differences in cutting, drilling, positioning, or finishing compared to the images.
Safety information – Regulation (EU) 2023/988 (GPSR)
Manufacturer:
Lucy 3D Lab
Via Libertà III Traversa Sinistra 6
80055 Portici (NA), Italy
E-mail: admin@lucy3dlab.it
SKU / Product identifier: Tubs-0023.
- Not a toy. Product intended for an adult audience. Keep screws, nuts, clips, and other separable components away from children.
- Door assembly: secure the door properly using the included screws and nuts. Before use, check its stability, alignment, and proper closure.
- Checks: before use and periodically, check the container, door, plastic mesh, side tabs, screws, nuts, lid, air vent, and clips. Discontinue use if cracks, deformations, sharp edges, or damaged or loose components are present.
- Plastic mesh: do not use the product if the mesh has tears, deformations, holes, or sharp parts. Verify that the animal and any feeder insects cannot pass through it or damage it.
- Choice of animal: verify that dimensions, ventilation, materials, closures, and environmental limits are adequate for the needs of the species and the individual specimen.
- Ventilation and environmental parameters: do not obstruct the plastic mesh or the air vent. The box does not independently regulate temperature, humidity, and air exchange: regularly check the parameters required by the species.
- Risk of escape: the door tabs and lid clips do not make the box absolutely escape-proof. Always verify their correct positioning before leaving the animal unattended.
- Do not use with animals capable of deforming, lifting, forcing, or damaging the container, the door, the plastic mesh, the lid, the air vent, or the closures.
- Positioning: place the box on a flat, stable surface adequate for its size and weight.
- Temperature and heating: use exclusively between 0 and 45 °C. Any heating systems must be controlled via thermostat and must not come into direct contact with the container or the installed accessories.
- Cleaning: wash by hand with warm water and a neutral detergent. Do not use solvents, harsh detergents, or dishwashers. Dry completely before reuse.
Returns, withdrawal, and legal warranty
Withdrawal: for standard catalog products, the consumer can exercise the right of withdrawal within 14 days of delivery. For custom-made or clearly personalized products, the right of withdrawal may not apply in cases provided for by law.
Return: in case of withdrawal, the direct costs of returning the product are borne by the customer.
Legal warranty: products are covered by the Legal Warranty of Conformity provided by applicable law.
Read the full policy on returns, withdrawal, refunds, and legal warranty.